1 / 5
Lincoln Logs Complete Set
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a complete set of Lincoln Log compatible parts.
included are:
- 1 notch log
- 1 notch log base / half
- 2 notch log
- 2 notch log base / half
- 3 notch log
- 3 notch log base / half
- 4 notch log
- 4 notch log base / half
- Chimney
- Roof supports
- 3 notch shingle
- 4 notch shingle
You can print these quickly with no supports. I used wood PLA and printed everything with 5% infill and .3 layer height since there are not any complicated patterns. One change I did make over the original Lincoln Logs was to trim the height a little bit so it removes some of the material to make them a little more stable than the original logs.
The .gcode is included to make printing super easy so you can spend more time building.
- 1/27/2025 added 4 notch shingle