Lincoln Logs Complete Set
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.21 – €0.25 net (excluding VAT)
For file: Lincoln Logs-1-Half_0.2mm_PLA_MK3S_16m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.23 excluding VAT (range midpoint).
- Weight reported by the author
- 2 g
- Print time reported by the author
- 16.2 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Complete Lincoln Log compatible set
- Rating
- 5 / 5
- Likes
- 285
- Downloads
- 951
- Makes
- 4
- Views
- 5,337
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Building Toys
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a complete set of Lincoln Log compatible parts.
included are:
- 1 notch log
- 1 notch log base / half
- 2 notch log
- 2 notch log base / half
- 3 notch log
- 3 notch log base / half
- 4 notch log
- 4 notch log base / half
- Chimney
- Roof supports
- 3 notch shingle
- 4 notch shingle
You can print these quickly with no supports. I used wood PLA and printed everything with 5% infill and .3 layer height since there are not any complicated patterns. One change I did make over the original Lincoln Logs was to trim the height a little bit so it removes some of the material to make them a little more stable than the original logs.
The .gcode is included to make printing super easy so you can spend more time building.
- 1/27/2025 added 4 notch shingle