There's A Ghost (glowing) In My House
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hello, here is a new version of my "There is a ghost in my house", to put an LED candle in it.
- Ocena
- 4,813 / 5
- Polubienia
- 188
- Pobrania
- 997
- Wydruki
- 23
- Wyświetlenia
- 4076
- Oceny
- 16
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bedroom
- Licencja
- Creative Commons — Attribution — Noncommercial
Hello, here is a new version of my "There is a ghost in my house", to put an LED candle in it. (https://www.prusaprinters.org/prints/30904-theres-a-ghost-in-my-house)
DO NOT put a real candle in it (unless you have very good insurance for your home :) )
It has two parts.
The phantom: its height is about 17 cm and is thinner (2 perimeters), and the base to put the LED candle and attach it with the cable zip tie or Velcro. There is a hole in the base bottom for the on/off switch.
MAX candle size :
Diam : 50 mm
Height : 80 mm
Need : 3 M3 screws and nuts
edit 2020/12/15 :
Add Fantome_Shell files : just the shell of the ghost. No base.
*I didn't try to print it yet