There's A Ghost (glowing) In My House
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€3.56 – €4.35 net (excluding VAT)
For file: ghost_light_base_03mm_pla_mk3s_3h9m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €3.95 excluding VAT (range midpoint).
- Weight reported by the author
- 66 g
- Print time reported by the author
- 3.16 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Hello, here is a new version of my "There is a ghost in my house", to put an LED candle in it.
- Rating
- 4.813 / 5
- Likes
- 188
- Downloads
- 997
- Makes
- 23
- Views
- 4,076
- Reviews
- 16
Updated at source:
Model information
- Source
- Printables
- Category
- Bedroom
- License
- Creative Commons — Attribution — Noncommercial
Hello, here is a new version of my "There is a ghost in my house", to put an LED candle in it. (https://www.prusaprinters.org/prints/30904-theres-a-ghost-in-my-house)
DO NOT put a real candle in it (unless you have very good insurance for your home :) )
It has two parts.
The phantom: its height is about 17 cm and is thinner (2 perimeters), and the base to put the LED candle and attach it with the cable zip tie or Velcro. There is a hole in the base bottom for the on/off switch.
MAX candle size :
Diam : 50 mm
Height : 80 mm
Need : 3 M3 screws and nuts
edit 2020/12/15 :
Add Fantome_Shell files : just the shell of the ghost. No base.
*I didn't try to print it yet