Bug Gun
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Got carried away tweaking the SMooSHER by schlem. On the original design I was breaking skewers with the deflection at…
- Ocena
- 5 / 5
- Polubienia
- 51
- Pobrania
- 293
- Wydruki
- 1
- Wyświetlenia
- 4256
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Got carried away tweaking the SMooSHER by schlem. On the original design I was breaking skewers with the deflection at the launching pin. This design constrains the pin and stop the deflection. I also changed the swatter to be 2 pieces with a ball and socket design. And almost everything else was changed or tweak.
Printing:
Handle - 0.28mm layer height & 10% infill, supports needed for trigger slot.
Launcher - 0.28mm layer height & 10% infill, no supports needed. Print vertical on the trigger end. I used a brim to prevent it coming loose.
Launch Pin - 0.20mm layer height & 100% infill, no supports, print on vertical on end.
Swatter Pin - 0.20mm layer height & 100% infill, no supports, print on vertical on end.
Swatter - 0.20mm layer height & 100% infill, no supports. Two different sizes, small I printed out of PETG and the large one out of TPU
Trigger - 0.20mm layer height & 100% infill, no supports
Assembly:
The handle locks into the launcher with at the trigger end and needs (2) - 2mm screws (no glue) at the back of the handle. The trigger is mount with (1) - 2mm screws.
The ball and socket seems to prevent the PETG swatter from breaking. It allows movement when hitting a hard object. The skewers I designed it around are about 3.0mm diameter.
Print Settings
Printer Brand:
Creality
Printer:
Ender 5
Rafts:
No
Supports:
Yes
Infill:
10% and 100%
Filament:
Spool3D PETGCategory: Other