Bug Gun
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Got carried away tweaking the SMooSHER by schlem. On the original design I was breaking skewers with the deflection at…
- Rating
- 5 / 5
- Likes
- 51
- Downloads
- 293
- Makes
- 1
- Views
- 4,256
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Got carried away tweaking the SMooSHER by schlem. On the original design I was breaking skewers with the deflection at the launching pin. This design constrains the pin and stop the deflection. I also changed the swatter to be 2 pieces with a ball and socket design. And almost everything else was changed or tweak.
Printing:
Handle - 0.28mm layer height & 10% infill, supports needed for trigger slot.
Launcher - 0.28mm layer height & 10% infill, no supports needed. Print vertical on the trigger end. I used a brim to prevent it coming loose.
Launch Pin - 0.20mm layer height & 100% infill, no supports, print on vertical on end.
Swatter Pin - 0.20mm layer height & 100% infill, no supports, print on vertical on end.
Swatter - 0.20mm layer height & 100% infill, no supports. Two different sizes, small I printed out of PETG and the large one out of TPU
Trigger - 0.20mm layer height & 100% infill, no supports
Assembly:
The handle locks into the launcher with at the trigger end and needs (2) - 2mm screws (no glue) at the back of the handle. The trigger is mount with (1) - 2mm screws.
The ball and socket seems to prevent the PETG swatter from breaking. It allows movement when hitting a hard object. The skewers I designed it around are about 3.0mm diameter.
Print Settings
Printer Brand:
Creality
Printer:
Ender 5
Rafts:
No
Supports:
Yes
Infill:
10% and 100%
Filament:
Spool3D PETGCategory: Other