1 / 3
Voron 0.2 Tophat Webcam (HBVCAM-3M2111) Holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This part allows it to attach a HBVCAM-3M2111 camera module or similar to the new Voron 0.2 Tophat.
- Ocena
- 0 / 5
- Polubienia
- 24
- Pobrania
- 145
- Wydruki
- 1
- Wyświetlenia
- 1218
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 1) (Komentarze: 7)Remiksy (0)Kolekcje (43)Powiązane
The bracket is angled so that it points centrally to the print bed (when placed at the top).
Mount it to the top right of the tophat and adjust the position before fastening it.
You need the following parts:
- 4* RX-M3x57 threaded inserts
- 4* M3*6 button head screws (other M3 screws may also work)
- 1* M3 Nut
- 1* M3*18 socket head screws (BHS should work, too)
Warning: You need to partly disassembly your tophat to install the M3 nut.