USB, (micro)SD Card Organizer (Incastro compatible)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
USB and (micro)SD card holder compatible with Incastro Desk Organizer.
- Ocena
- 5 / 5
- Polubienia
- 38
- Pobrania
- 229
- Wydruki
- 5
- Wyświetlenia
- 886
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
About the model
I created this simple to print organizer for my small storage equipment because I couldn't find angled models. It is compatible with the popular Incastro Desk Organizer: https://www.printables.com/model/56992-incastro-desk-organizer
This model measures 50x120mm with a height of 35mm and can hold up to 6 usb sticks, 8 microSD cards and 12 SD cards. The slots for the (micro)SD cards have an angle of 45 degrees. The USB slots are also angled for the bigger USB sticks.
Additional information
A calibrated printer is recommended, because the gaps are pretty tight. I printed the model with a 0,4mm nozzle, 0,2mm layer height and 50% infill. This to add some weight to the model as it is very light on its own. For standalone use I recommend some rubber feet at the bottom to prevent sliding.
Filament used in the pictures is Add North PLA (Marble).