1 / 3
Wider shock mounts for MrCrankyface V4 RC Truck — zdjęcie 1
1 / 3

Wider shock mounts for MrCrankyface V4 RC Truck

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

The shocks I got were a bit thicker and didn't fit the mounts properly.

Ocena
0 / 5
Polubienia
3
Pobrania
30
Wydruki
0
Wyświetlenia
202
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution

The shocks I got were a bit thicker and didn't fit the mounts properly.

Created these which push the shock head a bit to the side, while letting the screw go deeper into the mount (you can use the same screws).

Also added a side wall, so the mount now "rides" the frame.

The rear shock mounts only have one inner mount, due to the frame.

Print:

2x FrontOrMiddleRightShockMount
2x FrontOrMiddleLeftShockMount
1x RearRightShockMount
1x RearLeftShockMount

2020-09-28: I've installed pstimpel's gearbox to use my 80T 540 sized motor and now the front shock mounts were kinda in the way, so I've added a redesign of the front shock mounts to allow the proper gearbox clearance:

1x FrontLeftShockMount_Gearbox.stl
1x FrontRightShockMount_Gearbox.stl

Tagi