Wider shock mounts for MrCrankyface V4 RC Truck
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The shocks I got were a bit thicker and didn't fit the mounts properly.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 30
- Makes
- 0
- Views
- 202
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution
The shocks I got were a bit thicker and didn't fit the mounts properly.
Created these which push the shock head a bit to the side, while letting the screw go deeper into the mount (you can use the same screws).
Also added a side wall, so the mount now "rides" the frame.
The rear shock mounts only have one inner mount, due to the frame.
Print:
2x FrontOrMiddleRightShockMount
2x FrontOrMiddleLeftShockMount
1x RearRightShockMount
1x RearLeftShockMount
2020-09-28: I've installed pstimpel's gearbox to use my 80T 540 sized motor and now the front shock mounts were kinda in the way, so I've added a redesign of the front shock mounts to allow the proper gearbox clearance:
1x FrontLeftShockMount_Gearbox.stl
1x FrontRightShockMount_Gearbox.stl