Awning Switch Protector for Winnebago Revel
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This replaces the metal switch trim on a Winnebago Revel and provides protection for the switch.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 66
- Wydruki
- 0
- Wyświetlenia
- 537
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
The switches to deploy the awning and activate the awning light are positioned near the main door on the Winnebago Revel, and can easily be bumped when entering / exiting the vehicle. This protector replaces the metal switch plate and provides protection.
Print using a high infill (40-50%) in PETG for temperature stability.
To install, pull the fuse for the awning to prevent accidental use. Then, remove the 4 phillips screws holding the metal plate to the kitchenette. The switches have clips built into them - depress these clips on the top and bottom of each switch to remove from the metal plate. You will also need to unplug the switches from the wire headers.
Once the switches have been released from the metal plate, mount the protector using the 4 screws you removed previously, then re-connect to the headers (note that each switch has a slightly different wiring configuration - be sure you reconnect them appropriately!), and press each switch into the plate. They will lock into place. Finally, replace the fuse.