XFL Logo Magnets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I made the XFL logos into a printable magnet. Best used on the Bambu lab and AMS
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 264
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial
**If you see gaps in the slicer, try switching to Arachne wall generator under the Orca Slicer**
All files for each team. Each team is split into different components that you load into your slicer. I print with stock settings at .16mm layer height with a brim facing down to get the texture PEI look. If you have any questions, feel free to ask!
***These are supposed to be printed using a Bambu Lab with an AMS. Load them all up together and click yes. These will print as one piece, but you can change the color of each component***
This is what I used for magnets.
The filament I used. Use code DT3DPRINTS for 5% off
Like the files? Wanna give me a tip? Click the link below :)
https://paypal.me/DT3DPRINTS?country.x=US&locale.x=en_US
I plan to keep making new things so if your interested click the link below :)
patreon.com/user?u=54729735
Please post your makes!!