1 / 2
Smooth "Z-hop" Monster tray lids for Frosthaven (2 colors) — zdjęcie 1
1 / 2

Smooth "Z-hop" Monster tray lids for Frosthaven (2 colors)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Smooth (non-raised text) Monster tray lids for Leon_H's Monster Trays. Check out CHEP's video on YouTube.

Ocena
5 / 5
Polubienia
8
Pobrania
57
Wydruki
1
Wyświetlenia
907
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

I liked Leon_H's Monster Trays but decided I didn't want to have raised text if they were being used for Monster HP counting, so I redesigned them to work with the “Z-hop” method.

Check out CHEP's video on YouTube for instructions. In PrusaSlicer, you want to increase the "Lift Z" on the Printer Settings > Extruder > Retraction page.

I designed this to work with a 0.6mm nozzle printing with 0.3mm layers, but as you can see, the numbers could look sharper. The text is 0.6mm high, so I set my Lift Z to 0.7mm. I haven't tested using a 0.4mm nozzle, but it may be better if you want a sharper print at the expense of time.

Using the gcode files, print the “a” file (text) first, then swap your filament and print the “b” file (lid). The 3MF files will open in PrusaSlicer and have the lid and the text (with all pieces). If you plan on reslicing, hide one layer, get your settings right, export, then hide the other layer (and show the first) and repeat.

Tagi