Smooth "Z-hop" Monster tray lids for Frosthaven (2 colors)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Smooth (non-raised text) Monster tray lids for Leon_H's Monster Trays. Check out CHEP's video on YouTube.
- Rating
- 5 / 5
- Likes
- 8
- Downloads
- 57
- Makes
- 1
- Views
- 907
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Miniature Gaming Accessories
- License
- Creative Commons — Attribution — Noncommercial
I liked Leon_H's Monster Trays but decided I didn't want to have raised text if they were being used for Monster HP counting, so I redesigned them to work with the “Z-hop” method.
Check out CHEP's video on YouTube for instructions. In PrusaSlicer, you want to increase the "Lift Z" on the Printer Settings > Extruder > Retraction page.
I designed this to work with a 0.6mm nozzle printing with 0.3mm layers, but as you can see, the numbers could look sharper. The text is 0.6mm high, so I set my Lift Z to 0.7mm. I haven't tested using a 0.4mm nozzle, but it may be better if you want a sharper print at the expense of time.
Using the gcode files, print the “a” file (text) first, then swap your filament and print the “b” file (lid). The 3MF files will open in PrusaSlicer and have the lid and the text (with all pieces). If you plan on reslicing, hide one layer, get your settings right, export, then hide the other layer (and show the first) and repeat.