1 / 1
Print In Place Butt Hinge (Fusion 360 File Included)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Print in place (no support) Hinge, 40mm x 50mm
- Ocena
- 5 / 5
- Polubienia
- 27
- Pobrania
- 784
- Wydruki
- 3
- Wyświetlenia
- 2235
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 3) (Komentarze: 3)Remiksy (0)Kolekcje (34)Powiązane
General Info
- 3x M4 (countersunk) holes on each hinge side
- No supports needed
- 20.50mm on each side of the hinge
Models / Clearance
- 0.50MM_Print In Place Hinge.stl
- Default is 0.50mm gap (should work on just about any printer).
- 0.25MM_Print In Place Hinge.stl
- This has half the offset facing and hinge spacing as the 0.50mm model.
The slicing image below is an example comparing 0.25MM v 0.50MM gap for visualization

To Adjust Clearance (In Fusion 360)
- Open the .f3d file
- Open/Edit Hinge Geometry Sketch
- Edit the constraint (0.25mm in the example graphic below)
- Edit the face offsets (2) in the parametric timeline from 0.50m to 0.25mm (or other value)

- Export everything as Mesh (stl) and print it