1 / 1
Print In Place Butt Hinge (Fusion 360 File Included)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Print in place (no support) Hinge, 40mm x 50mm
- Rating
- 5 / 5
- Likes
- 27
- Downloads
- 784
- Makes
- 3
- Views
- 2,235
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Share Alike
General Info
- 3x M4 (countersunk) holes on each hinge side
- No supports needed
- 20.50mm on each side of the hinge
Models / Clearance
- 0.50MM_Print In Place Hinge.stl
- Default is 0.50mm gap (should work on just about any printer).
- 0.25MM_Print In Place Hinge.stl
- This has half the offset facing and hinge spacing as the 0.50mm model.
The slicing image below is an example comparing 0.25MM v 0.50MM gap for visualization

To Adjust Clearance (In Fusion 360)
- Open the .f3d file
- Open/Edit Hinge Geometry Sketch
- Edit the constraint (0.25mm in the example graphic below)
- Edit the face offsets (2) in the parametric timeline from 0.50m to 0.25mm (or other value)

- Export everything as Mesh (stl) and print it