K40 Laser mA Meter Housing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Side mounted housing for mA meter
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 313
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
I didn't want to drill a big hole on the control panel so I decided to mount the mA meter on the side next to the control panel area. This way I only have the 4 holes for the mounts and a small hole for the wires.
On the housing, I also put holes, opposite of the mounting screws so one can fit a small nut driver in to secure the mA meter. Once the meter is mounted, I will use E6000 to glue the plugs I made for those holes. The E6000 allows for the removal of those plugs fairly easily if needed unlike super glue.
I might expand on this idea by making one a bit larger t o hold a water flow indicator either digital or visual where the water flows through.