K40 Laser mA Meter Housing
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Side mounted housing for mA meter
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 27
- Makes
- 0
- Views
- 313
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
I didn't want to drill a big hole on the control panel so I decided to mount the mA meter on the side next to the control panel area. This way I only have the 4 holes for the mounts and a small hole for the wires.
On the housing, I also put holes, opposite of the mounting screws so one can fit a small nut driver in to secure the mA meter. Once the meter is mounted, I will use E6000 to glue the plugs I made for those holes. The E6000 allows for the removal of those plugs fairly easily if needed unlike super glue.
I might expand on this idea by making one a bit larger t o hold a water flow indicator either digital or visual where the water flows through.