Dry Box for MMU2S Supplied Spool Trays
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I had my first experience with bad prints due to moist filament since I installed the MMU2S kit.
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 95
- Wydruki
- 0
- Wyświetlenia
- 1544
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
I had my first experience with bad prints due to moist filament since I installed the MMU2S kit. Because it is such a pain to thread the five spools, I was leaving them out. With a single spool I always put the filament back in the ziplock bag and a silica gel packet.
I ended up getting a SUNLU filament dryer ( https://amzn.to/39TbOQc ), but buying five would be expensive!
I figured I would just fill the trays with Silica Gel beads and 3D print a cover using transparent PETG. The design had to work around the MK3S print volume. I installed a temperature / humidity sensor to make sure everything is OK.
I tried single and double wall boxes, but they failed. I ended up 4 filament wide walls. It's a long print, but I'm pretty happy how they are working.
items used:
- SUNLU Dryer box ( https://amzn.to/39TbOQc )
- Overture Clear PETG filament ( https://amzn.to/39UaQDl )
- Temperature / Humidity Sensor ( https://amzn.to/37OpKIy )
- Rechargable Silica Gel Beads ( https://amzn.to/39QYMTm )
- Ziplock bags ( https://amzn.to/37Keehm )
As an Amazon Associate I earn from qualifying purchases.
Youtube video at: https://youtu.be/QgW66pFrCdQ