1 / 3
Gridfinity magnetic baseplate jig - Print in place
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Glue magnets into your Gridfinity baseplates with ease with this print-in-place remixed jig
- Ocena
- 4,909 / 5
- Polubienia
- 107
- Pobrania
- 614
- Wydruki
- 12
- Wyświetlenia
- 4962
- Oceny
- 11
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 12) (Komentarze: 18)Remiksy (1)Kolekcje (230)Powiązane
What
Keeps your magnets aligned for superglue and installation. It's the logical counter-jig to this one for bins:
If your baseplate uses “press fit” style clearance, I recommend this tool instead:
This model is a remix of https://www.printables.com/model/329110-gridfinity-magnetic-baseplate-jig . It's completely redesigned from the ground up, so it doesn't need support. The trick was adding a square in the middle for alignment.
Make the jig
- Print out both pieces.
- Determine your magnetic alignment. If you're using a bin jig, they should lock together like this:
- Insert 6x2 magnets into the holes of the jig and glue in place. I recommend wearing nitrile gloves
Use the jig:
- Put jig onto the separator. Square facing up.
- Put magnets on the separator, they will “click” into the right orientation:
- Put superglue on the magnets (wear nitrile gloves)
- Insert the jig and separator with magnets into the baseplate.
Remove the jig
- With one hand, press the separator into the baseplate
- With another hand, lift the jig away from the separator.
- Once the jig is clear, you can remove the separator from the baseplate