Darwin240 Johnny 5 Camera mount and guard
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Front camera mount and guard for the DarwinFPV Johnny 5.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 46
- Wydruki
- 0
- Wyświetlenia
- 460
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
The Darwin FPV 240 Johnny 5 has a terrible camera out of the box. Do yourself a favor and replace it. These mounts are lighter than the carbon side pieces, and add camera protection. The front standoffs are a very tight fit and may need to be pressed in, I used a bench vise on the PETG, but the PLA went on by hand. I printed it in Prusament PLA (black) and PETG (blue). I ended using PETG as it can take more abuse. I used 80 to 100% infill but saw no difference in the end result. Three version are attached, I used (2) with my full size Caddx Ratel and it worked great for me. I switched the quad from its terribly fragile frame so I will not be refining this design further.