Darwin240 Johnny 5 Camera mount and guard
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Front camera mount and guard for the DarwinFPV Johnny 5.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 46
- Makes
- 0
- Views
- 460
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
The Darwin FPV 240 Johnny 5 has a terrible camera out of the box. Do yourself a favor and replace it. These mounts are lighter than the carbon side pieces, and add camera protection. The front standoffs are a very tight fit and may need to be pressed in, I used a bench vise on the PETG, but the PLA went on by hand. I printed it in Prusament PLA (black) and PETG (blue). I ended using PETG as it can take more abuse. I used 80 to 100% infill but saw no difference in the end result. Three version are attached, I used (2) with my full size Caddx Ratel and it worked great for me. I switched the quad from its terribly fragile frame so I will not be refining this design further.