122 GHz Radio Housing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3D printable parts for VK2XAX 122 GHz transceiver. With or without a lens.
- Ocena
- 4 / 5
- Polubienia
- 2
- Pobrania
- 19
- Wydruki
- 1
- Wyświetlenia
- 224
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
This set of prints can be used in combination with 10mm T-slot extrusion (like Makerbeam) to construct a housing for the VK2XAX 122 GHz transceiver boards outfitted with a horn antenna. An optional 3" Thor Labs horn can be used to add additional gain.
More details on construction to follow.
Brass threaded heat inserts are to be used for the part where the PCB mounts (for 3mm screws).
You'll need 8x 15mm long, 10mm wide Makerbeam. The front pieces for the lens attachment are 109mm and will need to be cut to length and threaded with a 3mm tap. You'll need a bunch of 3mm screws for this.