Liczymy pasujące modele…
____________________________________________________ Update 21.02.2023 Updated ALL Names for better understanding which part is for what it does and which revision and sorted them in folders. Over the years, the package is massive, I…
3D printable 5-loop and 6-loop helical directional antenna to be used on 5.8GHz FPV video receivers (e.g. FPV goggles). We reached more than 600 downloads! If this model is helpful for you, a quick ❤ will help other makers and pilots find…
I have made a custom slim case for my external SubGHz module for Flipper Zero. There are various types of SubGHz modules for Flipper, so please check the link below or the photos to make sure it fits yours. I have printed mine using a…
IF YOU MISS SOMETHING - LOOK in the original V1 package. There are multiple Helix Holders, multiple bend helper for different diameter and so on. I dont wanted to just copy everything here. So, now to the V2: Hi, this is the V2 version of…
Note: this antenna has not been tested or optimized. The design is a WIP. None of the photos included are actually from this design as I haven't built it yet. However, the photos should be close enough to give you an idea of how things go…
This is a direct replacement of the Profoto Air 2.4GHz Remote Transceiver shoe mount. The profoto shoe mount breaks pretty easily and is a couple hundred dollars to get it repaired. I've been using this to replace well over a few dozen…
USB micro-use/typeC cable or 5V dupont wire power supply Hardware: ESP8266 D1 Mini | W:23.2mm X H:34.3mm HLK-LD2420 | 20mmX20mm Dupont 2.54 X 2pcs (Optional) I have a spare Xiaomi motion sensor base, connecting to the case with a M3*8…
Self made directional WLAN Antenna EXTENSION in YAGI style for 2.4 Ghz WLAN with regular copper rods. To optimize you WIFI environment. Instructions Use 0.75 mm² (1 mm diameter) Copper Rods for 2.4-GHz-Antenna-Extension: Position -…
Radar dish support for HLK-LD2410C motion sensor mmW 24GHz. Printed with 0.4 nozzle, PLA, with organic supports.
https://www.reddit.com/r/flipperzero/comments/11s77sw/fully_unofficial_external_subghz_cc1101_module/
I need a little Wifi Yagi every once in a while so I thought I would make a 3d printed quick build antenna. While I was drawing it I thought I'd include a means to automatically measure the elements as I assemble it. Well then I of course…
This model is a replacement I made for the 2.4ghz mouse dongle shroud of my Razer Basilisk X Hyperspeed that snapped in half. I tore apart the mangled original shroud, put the PCB into the slot of the print, and then put the metal USB…
To assemble the stand all you need is 1 x M3x20 screw and nut. You can find this great 7' Eachine monitor here: https://bit.ly/39uZf9U Other sizes and types of FPV monitors: https://bit.ly/3aqM2A9
Thanks for supporting me: Patreon: https://www.patreon.com/dm4ds Paypal donation: https://www.paypal.com/paypalme/dm4ds BMAcoffee: https://buymeacoff.ee/dm4ds Bitcoin: bc1qf426e46h6kdtmws4cjnu6wa3wtzy8qvctq9j9u Etherium:…
Consists of a shaping tool and the final holder. You need to print this very fine cause we have very thin walls. 03.09.2013: Design changes done. Now I get much better results even with 0,18mm layer height. 05.09.2013: Changed the…
Printed with PETg, no support required.
ExpressLRS rocks! This little mount is designed for the TBS SourceOneV3 frame, to attach the small 2.4GHz T-antenna to the back of the drone, right beneath the mount for the video antenna. The holes for the poles of the frame have a…
A simple and small clip which can be glued to the inside of your FPV plane to hold 2.4Ghz aerials securely in place without having to tape them down. The antenna used in the photo is from a BetaFPV SuperD diversity transceiver– The clip…
This is an antenna mount for the 2.4Ghz ExpressLRS antenna for the GEPRC Smart35. It can be used on the back or the front, depending where you mount your receiver and the length of your antenna cable. It may work on other frames but it…
It the simplest holder i could come up with. May add a ball-joint to the back, in case i want to mount in a differnt one, depends, how well it will function.
The MR60FDA2 and MR60BHA2 Sensor leverage 60GHz mmWave technology and offer reliable human presence & fall detection, and human presence, breathing and heartbeat detection respectively. Featuring light level sensing, an RGB LED for…
---- new model without battery ----- In the free applications for home automation, you can create your own sensors to control/detect the environment. To create a detector/sensors, you need to have some electronics cards to create a new…
I´ve created this 2.4 GHz Moxon antenna to enlarge the Range of my Wi-Fi-repeater. The cutouts are exactly the right size for use with 0.2mm² wire. Category: R/C Vehicles
I don't like how the antenna takes some unnecessary space on the T14, since the original 2.4Ghz antenna is really small there is no need for that big enclosure. As long you don't use vertical polarized this mod would not cause any…
8/6/2022 update : You need to file down the protruding ears of the center part a bit to avoid from rubbing with the frame Antenna replacement for internal ExpressLRS module of the Jumper T Pro. Bothered with the stock antenna which took…
Drop-in replacement for the standard flywoo LR4 antenna mount. Print without supports(turn the holes towards the table). Use TPU plastic. The antenna should slip into the mount.
1.654GHz antenna for weather sat reception. Pint the base with some infill and the tube in vase mode. Category: Electronics
24GHz mmWave Sensor for XIAO - Human Static Presence is a expansion board for Seeed Studio XIAO series. It is an antenna-integrated, high-sensitivity mmwave radar sensor that is based on the FMCW principle. Combined with radar signal…
What once lived exclusively on a slot car track is now free to explore your entire home. This conversion transforms a classic Carrera Digital 132 slot car into a fully independent 2.4 GHz remote-controlled RC car – compact, powerful, and…
3D printed full front chassis for a 2.4GHZ conversion Feel free to add comments about improvements! I am constantly working on it! I tried to optimize it for 3d printing, with the least amount of supports possible. THIS WILL NOT WORK WITH…
Lenght for the Elements: 59,7 mm - Reflector 50,2mm - Director 1 49,5mm - Director 2 48,7mm - Director 3 48,1mm - Director 4 47,4mm - Director 5 Print Settings Printer: FLSun Cube Rafts: Doesn't Matter Supports: No Category: Computer
This model interfaces t0nito's '1.7 Ghz HRPT Helicone Antenna' with jbyrns' 'AZEL_Satellite Antenna Rotator - Tracker' , allowing both to fit together making it a great addition for tracking L-Band satellites. More information on my…
SpeedyBee Receiver 5.8GHz Adapter for Skyzone 04X Pro Modular Bay This is a custom-designed adapter that allows you to mount the SpeedyBee Receiver 5.8GHz into the standard modular bay of Skyzone 04X Pro goggles . It ensures a secure fit…
This is a simple case for the Flysky 2.4GHz 6CH FS-X6B Receiver which does not come with a case. So is not very protected. Printed in ABS 0.4mm nozzle 0.3 layer height. May need a bit of a clean up around the cutouts depending on how your…
See description in the main model https://www.printables.com/model/1020388-esp32-d1-mini-ld2420-24ghz-mmwave-radar-sensor-esp Difference : ESP32 S2 mini used and the radar LD2410
Thanks for supporting me: Patreon: https://www.patreon.com/dm4ds Paypal donation: https://www.paypal.com/paypalme/dm4ds BMAcoffee: https://buymeacoff.ee/dm4ds Bitcoin: bc1qf426e46h6kdtmws4cjnu6wa3wtzy8qvctq9j9u Etherium:…
I'd browsed the internet but I haven't found a single case for Matek Video Receiver for 1.3/1.2 GHz. I designed it to be mounted sideways on the plane however feel free to remix it the way you like. I suggest to print using PETG, because…
I have tested it and works well with the default dimensions with the file I printed mine in ASA with a Sovol SV06 plus
Re-designed the original back parts of HOLY helix feeder to fit on a Bullseye 10kHz TXCO LNB and beeing printable without supports. For my printer the M112.5x3 threaded parts work best with the original cover. I also added a M112x3 and a…
This is a blank for fitting.
AntiHunter Perimeter Defense Systems, DIGINODE 2.4Ghz (Original Enclousures) PCB store: https://www.tindie.com/products/teamantihunter/antihunter-digi-24ghz-wifible-node-pcb-only-2/ Follow me: https://x.com/SirhaXalot_ Follow Luke:…
I am a second generation rf engineer, and wanted to build a RF horn for use. My dad used to show off the huge horns they used in the military. I started this a few years ago, and just re-opened my eyes to using 3d and cad. Long story…
Print it yourself or order from Shapeways ! Shell for a 5.8 GHz 'pagoda' type antenna (by Maarten Baert). Tested with an antenna built from a Farview kit, fits nicely. The two halves can be glued, or just use 30mm (or larger) heat shrink…
This TPU part holds the back antenna (2.4GHz ExpressLRS) on a iFlight XL10 frame. Print on the side (see pictures).
This is a generic 2.4 GHz antenna protector that can only be used when printed in a flexible material like TPU. To insert the antenna, it needs to be bent so that each half of the antenna can fit into one of the sides. To attach it to a…
In the free applications for home automation, you can create your own sensors to control/detect the environment. To create a detector/sensors, you need to have some electronics cards to create a new device to add in your Home Assistant…
Just a simple bracket for mounting a 2.4ghz wifi yagi antenna to a tripod. There's a slotted area for the boom and you secure it with a couple of zip ties. The hold is the right diameter to thread the tripod bolt into. Category: DIY
https://github.com/manbehindthemadness/MavPi
Use .2MM layer height 10mm x 5mm x 2mm Neodymium Magnets for easy opening.
This is a simple antenna protector that I designed. The primary objective was to keep it light and very strong. I designed it for the AOMWAY 4-leaf clover antenna, but should fit all 5.8ghz antennae which are the same style. There is a…
This is the housing case for the LD2450 24GHz radar presence sensor with chinese cloned Wemos D1 Mini. There's no need any crew, all are snap-in.
https://github.com/manbehindthemadness/MavPi
Use this model for your own assemblies, for example, in a pair with fpv-glasses, etc. The dimensions have been kept according to the real ones.
Mocowanie składa się z 3 elementów, szyny klejonej do gogli, spodu pojemnika z szyną wsuwającą się do gogli i pojemnika na odbiornik i konwerter, odbiornik należy włączyć do pierwszego (z brzegu) rzędu gniazd, wtedy dopasowanie jest…
FrSky Archer Plus RS 2.4GHz Receiver Case
A precision, two-piece, 100% support-free snap-fit enclosure engineered for a high-performance ESPHome / Home Assistant multi-sensor. It houses an ESP32-C3 SuperMini, an SHT41 temperature/humidity sensor, a VEML7700 ambient light (lux)…
Antenna Boom Holder for the Eachine 250 FPV Quad. Designed to fix 2 2.4GHz antennas (e.g. Jeti Duplex RSAT) at the tail of the quadcopter., using 2 pieces of bowden tube as guiding for the antenna ends. Drill the 2 fixing holes to 2.4mm…
Antenna socket for the Multiplex mc2020 / mc2010 R/C transmitter, to replace the original "telescopic" antenna socket. Just snap into the transmitter housing instead of the original one. A standard 2.4GHz antenna sockets fit well into…
This project adapts a KKmoon digital frequency counter module for use with a classic Grundig GDO 701. The module is specified for 1–500 MHz, but it can be used up to about 1.1 GHz. Accuracy is high below 500 MHz; above 500 MHz, readings…
FrSky TWIN Mini Dual 2.4GHz Receiver Case
This is simply to mount a 2.4Ghz receiver antenas like a T mount. You just need a two antennas tubes and caps. Print Settings Printer: Delta Rafts: No Supports: Yes Resolution: 0.2 Infill: 15% Filament: any TPU Category: Hobby
This mast mount is for a popular WA5VJB PCB Yagi antenna (1.2 GHz). Fusion 360 source file is available for downloading. Antenna polarization: Horizontal Mast diameter: 13 mm (½"). Material: PETG Infill: 30%
Antenna mount for ELRS 2.4 GHz diversity antennas. This should be mounted vertically, with one antenna perpendicular to the ground and the other parallel, to maximize coverage for a ground vehicle. The perpendicular orientation of the…
ELRS Modulecover Happymodle 2,4ghz
Ground Station for the RC840/RC832 5.8G Video Receiver. Features: Vertically mount the VTX and enables to mount different antenna sizes. Built in voltage display On/Off Switch Video out port Parts: Voltage display RCA Connector 3.5mm…
same object with enlarged hole. Do not use this with modern routers as they are likely to use PCB antenna and no longer compatible with this mod. Category: Computer
AR Wing Furious 2.4ghz VTX + pigtail mount VTX is held on by a ziptie or foam tape (or both) Just screw on an antenna to secure the pigtail The whole mount is held in place by the screw that is used for fastening the wing Category: R/C…
https://freeantennas.com/projects/Ez-10/index.html In the tradition of Freeantennas.Com, I've uploaded a Corner Reflector which should fit most antennas found on most Wifi Access points. I've also included the OpenScad source code so you…
A blank for design fitting.
Jig for making a 2.4ghz folded dipole. This is a great antenna you can build yourself following the instructions at the link below. There is also a cover for it to protect the element in my other things.…
Gopro style mount set for the ClearView 2.0 FPV receiver https://clearview-direct.com/shop/ground-station-receivers/5-8-receivers/clearview-2-0-5-8ghz-racer/ I suggest: TPU or a Firm TPU for the ClearView mount Printed on it's side for…
A cover to protect your 2.4 ghz folded dipole. This is a great antenna you can build yourself following the instructions at the link below. I build mine with .8mm copper wire if you used 1mm copper then scale up by 2%. Print two and press…
The Gridfinity holder allows storing both the remote and the 2.4 GHz (non Bluetooth) USB dongle that comes with it. It has a place for an additional dongle in case you need it. At the moment of writing this, the specific remote this is…
Right and left rotating skew planar for 5.8 Ghz. Especially for the RG402 cable. If you are quick at soldering, petg will do. Otherwise, choose something heat-resistant. You can print it with 0.12 to 0.2. I wouldn't recommend it above that.
A parametric mounting bracket for four HLK-LD2450 24GHz radar modules on a 1" (25.4mm) square aluminium tube. Designed for outdoor radar sensor arrays. Features: C-channel grooves hold PCBs securely at 90-degree intervals around the tube…
Wall Mount for a Mono Price Blackbird Pro WiHD 60GHz HDMI Extender. For use with -→ https://www.monoprice.com/product?p_id=16049
Kamera: https://www.amazon.de/gp/product/B01AJSVSRG/ref=oh\_aui\_detailpage\_o08\_s00?ie=UTF8&psc=1 5,8GHz Sender: https://www.amazon.de/gp/product/B00O7JK5CI/ref=oh\_aui\_detailpage\_o06\_s00?ie=UTF8&psc=1 5,8GHz Antennen:…
This was quick and dirty work
replaces the stock screw on cone cap for the probe that fits newer 2.0Ghz seizure-less taps. prevents damage to the pin, reduces contact with water and dirt, and provides easier storage of, and access to, the probe. mount to meter bag or…
I designed this lightweight 2.4GHz T-antenna mount after being a bit disappointed in my AIO's built-in receiver performance. Designed to upgrade your Meteor75 Pro frame to an external RP1 receiver at the cost of a couple grams. This mount…
I made some diffusers for the F2 by MEDALight, using SUNLU PLA+ white filament gives a slight warming look to the light. The larger the diffuser the less light passes through as to make the light softer, if you have any suggestions let me…
Description This enclosure was designed for my 30 MHz–1.3 GHz, 1:1000 frequency counter prescaler , which extends the useful range of older frequency counters into the VHF and UHF bands. The case consists of two parts: a bottom housing…
A box for StickTime Pi: a Raspberry Pi 4, a 5.8 GHz VTX and a 40 mm fan, all in one. The Pi runs a free FPV sim and sends the picture through the VTX into your analog goggles. You fly it with your own radio. How it cools The fan hangs…
This is a replacement 1.7Ghz LNB housing that will fit older 2.4Ghz Wifi Grid Antennas. I used this to receive GOES-16 weather satellites on L Band (1.7Ghz). The dimensions of the copper wires are approximate but its tuned to 1.7Ghz using…
Antenna mount for ELRS 2.4 GHz diversity antennas. This should be mounted vertically, with one antenna perpendicular to the ground and the other parallel, to maximize coverage for a ground vehicle. The perpendicular orientation of the…
This model interfaces t0nito's '1.7 Ghz HRPT Helicone Antenna' with jbyrns' 'AZEL_Satellite Antenna Rotator - Tracker' , allowing both to fit together making it a great addition for tracking L-Band satellites. More information on my…
https://freeantennas.com/projects/Ez-10/index.html In the tradition of Freeantennas.Com, I've uploaded a Corner Reflector which should fit most antennas found on most Wifi Access points. I've also included the OpenScad source code so you…
AntiHunter Perimeter Defense Systems, DIGINODE 2.4Ghz (Original Enclousures) PCB store: https://www.tindie.com/products/teamantihunter/antihunter-digi-24ghz-wifible-node-pcb-only-2/ Follow me: https://x.com/SirhaXalot_ Follow Luke:…
A parametric mounting bracket for four HLK-LD2450 24GHz radar modules on a 1" (25.4mm) square aluminium tube. Designed for outdoor radar sensor arrays. Features: C-channel grooves hold PCBs securely at 90-degree intervals around the tube…
This is the housing case for the LD2450 24GHz radar presence sensor with chinese cloned Wemos D1 Mini. There's no need any crew, all are snap-in.
This TPU part holds the back antenna (2.4GHz ExpressLRS) on a iFlight XL10 frame. Print on the side (see pictures).
This is a replacement 1.7Ghz LNB housing that will fit older 2.4Ghz Wifi Grid Antennas. I used this to receive GOES-16 weather satellites on L Band (1.7Ghz). The dimensions of the copper wires are approximate but its tuned to 1.7Ghz using…
This housing is designed to hold a Kuhne MKU 10 G5, 3 cm transverter, and a small horn antenna. Additionally, it features a slot for a Talentcell 3Ah battery. For the battery, a barrel connector on a cable is required to be glued into…
At high power outputs this VTX require active cooling. This is achieved by top mount in direction of airflow. Print Settings Printer Brand: Zortrax Printer: M200 **Rafts:** Doesn't Matter Supports: Yes **Resolution:** 200 Infill: 20…
In case a rc model's fuselage hull is painted with colors that are containing metallic particle it's recommended to place the 2.4 GHz antenna outside the fuselage. This semi-scale antenna body can be mounted outside the fuselage and has a…
Update: now with 3 size M, L and XL depending of diameter of Antenna 1,1mm => M 1,8mm => L 2,5mm => XL ✅ Key Features Optimized 90° antenna orientation Improved reception and reduced signal dropouts Very small and lightweight – ideal for…
