1 / 2
directional YAGI WLAN Antenna EXTENSION for 2.4 GHz — zdjęcie 1
1 / 2

directional YAGI WLAN Antenna EXTENSION for 2.4 GHz

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Self made directional WLAN Antenna EXTENSION in YAGI style for 2.4 Ghz WLAN with regular copper rods. To optimize you…

Ocena
5 / 5
Polubienia
32
Pobrania
254
Wydruki
1
Wyświetlenia
1958
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution

Self made directional WLAN Antenna EXTENSION in YAGI style for 2.4 Ghz WLAN with regular copper rods. To optimize you WIFI environment.

Instructions

Use 0.75 mm² (1 mm diameter) Copper Rods for 2.4-GHz-Antenna-Extension:

Position - Length:
A - 60 mm
B - 53 mm
C - 52 mm
D - 51.5 mm
E - 51 mm
F - 50 mm

If you want to use 1.5 mm² (1.4 mmm diameter) Copper Rods, shorten the length of the rods around 1 mm.

To use 2.5 mm² (2 mmm diameter) Copper Rods, drill bigger holes and shorten the length of the rods around 2 mm.

Just center the rods in the holes and fixate them with glue.

Place the complete antenna-extension on your accesspoint-antenna and you have a directional WIFI Signal :)

The gain should be around 10 (+/- 2) dBi.

Have fun :)

Category: Other

Tagi