1 / 2
PrintedSolid Jessie Cardboard Filament Spool Filler Spacer Support New Version
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Spool support for the newer version of PrintedSolid Jessie cardboard spools
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 106
- Wydruki
- 2
- Wyświetlenia
- 392
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 2) (Komentarze: 3)Remiksy (0)Kolekcje (16)Powiązane
Yet another spool design, yet another spool support design. Thankfully, the new cardboard design allows for a minimal spool support. This one costs less than 16g (~8g each) of filament per spool. Printed with a 0.6mm nozzle at draft layer height. No supports required. The tabs keep it in place but is also removable for reuse.
The support model for the older cardboard spool with the metal rim is here – https://www.printables.com/model/148961-printedsolid-jessie-cardboard-filament-spool-fille