Wrench for a water purifier (Reverse Osmosis filter) resin tank cap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
If you have a fish tank, and especially a salt water recifal fish tank, may be you have a reverse osmosis filter too.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 70
- Wydruki
- 0
- Wyświetlenia
- 670
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
If you have a fish tank, and especially a salt water recifal fish tank, may be you have a reverse osmosis filter to purify the tap water you use for your tank.
Now I don't know about you, but the device I got came with a wrench to unscrew the fiber filter tanks, but none to open the resin tank (the last tank in the water circuit).
And it can be really difficult to open !
That's why I designed this wrench, and I'm now able to replace the resin without ripping the skin of my hand appart !
Enjoy
Instructions
I printed it on a dual extruder Wanhao.
I have printed one with 15% fill and 2 shells, and it's working fine.
Since the dimension tolerance is pretty low for it to work fine, I first printed a very thin prototype, just a few layers, which gave me a paper-like prototype I used to check it would fit around the tank cap. And it did !
Then I printed the full stuff. And it worked !
Let me know if you make one.