Parametric (F360) Hinged box with Magnetic Closure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a print in place hinged box (based on the video by Product Design Online)
- Ocena
- 5 / 5
- Polubienia
- 15
- Pobrania
- 209
- Wydruki
- 2
- Wyświetlenia
- 1533
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
This is a hinged box (based on the video by Product Design Online) with inserts for 6 x 2.75 mm magnets in the outer corners.
UPDATE! If you are having trouble with the magnet spots when resizing, try MadMax's remix. He's done some work on fixing it.
The STL is 75 x 50 x 40 mm, but I'm including a Fusion 360 file that uses parameters to control everything. The only problem is that you can't size the magnets over 6mm in diameter without breaking the model. You can go lower, but you can't go higher.
Everything else is up for grabs. Length, width, height, hinge size, wall thickness, fillet size. It's all customizable.
Category: Tool Holders & Boxes