1 / 3
The AUDHEID K7, 8-bay NAS PSU Mounting Bracket
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A much improved PSU mounting bracket and back PSU plate for the AUDHEID K7 NAS case.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 870
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The AUDHEID K7 8-bay NAS case is okay, but with one flaw: the included PSU mounting bracket is very thin and flimsy, and bends easily, and the cutout in the bracket does not match my PSU very well. My bracket fixes this and is made of two parts: a backplate that slips over the PSU, and a cover that goes on the outside of the case. The backplate is designed for M3 heat-set inserts. The screws go in from the front and screw into the backplate, making for a very snug fit.