Rear foot Z-axis v2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
See project too https://www.prusaprinters.org/prints/45555 Rear foot Z-axis for screwing to the Z_Box, I have also…
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 100
- Wydruki
- 1
- Wyświetlenia
- 1240
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Siehe auch Projekt https://www.prusaprinters.org/prints/45555
Rear foot Z-axis for screwing to the Z_Box, I have also designed a drilling template for this.
It's up to you whether you use the rear foot for clamping or screwing on, of course you have to be careful when drilling.
Print the rear foot Z axis with support everywhere, 3mf file with setting is included but I did it with MK3S so please pay attention to your printer profile.
Tightening the lower M3 screw is a bit of a hassle. You need to find a way to hold the M3 nut in place when you tighten it.
required parts:
3x M3x8mm DIN 912 Cylinderhead screw
3x M3 nuts