Frosty the Snowman Wind Spinner
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I love Wind Spinners and thought I would design one for the Winter Season.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 59
- Wydruki
- 0
- Wyświetlenia
- 631
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial
I love Wind Spinners and thought I would design one for the Winter Season. "Frosty the Snowman" came on the radio... so that gave me the idea :-)
Parts used:
- Prusament PETG ( https://shop.prusa3d.com/en/23-pet )
- Overture PETG ( https://amzn.to/3oJItMb )
- Silicon Spray Lubricant ( https://amzn.to/3gGnIyj )
- 6mm carbon fiber rods ( https://amzn.to/3hCsY4L )
As an Amazon Associate I earn from qualifying purchases.
Print instructions
I printed this in PETG so I could use it outside. It was a real bear printing with the MK3S MMU2S! I kept getting filament threads on the tool changes that jammed the FINDA sensor. I probably had to take the MMU2 apart 10 times during the print. I used Prusament PETG filament and the default filament profile. It was very frustrating... but it was better than the ABS/ASA fumes. I also kept getting blob nozzle jams when I tried to resume the print after fixing the FINDA sensor. I wish the system would raise the head over in the corner when it tries to reload the filament. When it does it on the cleaning block I kept getting blobs.