Ruger 10-22 Mag Wrench
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple wrench to aid in placing tension on the hex nut which controls spring tension.
- Ocena
- 5 / 5
- Polubienia
- 58
- Pobrania
- 343
- Wydruki
- 5
- Wyświetlenia
- 1453
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
I did like most Ruger rimfire guys do...cleaned my mags...
In that it wasn't a bad experience I wanted to make it easier if possible.
So I designed a wrench that seems to work well enough to post.
This is my 3rd and likely the final edition.
The design allows for the exposed pin to seat in the wrench which keeps the wrench from slipping off while turning for tension.
The sides are inset enough to get your finger nail in a position to push the hex nut into the housing.
Here is a link to a video I did to show how it works. Sorry I'm an old guy with bad hands :)
https://www.youtube.com/shorts/IyY3r-oSBF4
I really couldn't find any precise info on how many turns on the tension spring but I go about 1-1/2 revolutions once feed lip is in its correct position