1 / 7
Frame for a lithophane picture — zdjęcie 1
1 / 7

Frame for a lithophane picture

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a picture frame for a lithophane picture. It can be backlit.

Ocena
0 / 5
Polubienia
10
Pobrania
61
Wydruki
0
Wyświetlenia
466
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Home Decor
Licencja
Creative Commons — Attribution — Noncommercial

Frame for a lithophane picture:


- Printed on an AnkerMake M5 (foundet it on Kickstarter)

- Used the SUNLU PLA+ silver 1812211A filament

- Used the AnkerSlicer with 15% infill, 100% flow/215 °C/60 °C plate temperature(initial layer: 120% flow/220 °C/65 °C plate)

- Layer height: 0,2 mm

- Speed: With the new firmware update I printed it with 250 mm/s for the initial layer/Print speed at 500 mm/s!!!

- No supports needed

- No scaling

~ 2h25 print time

- 62 g filament

The inside measurement for the Lithopane image is: 95,5 x 115,5 x 8mm


Used the webside to create the lithophan picture/model:

https://lithophanemaker.com/Framed%20Lithophane.html

The size of the picture is: 95 x 115 x 7,5 mm

Here the other parameters:

Frame Options: Frame Only
Lithophane Resolution: 0.2
Base Length: 95
Base Width: 7.5
Base Height: 7.5
Overhang Angle: 60
Maximum Thickness: 3.0
Minimum Thickness: 0.6
Height: 115
Support Thickness: 2
Support Angle: 75
X Shift: 0.5
Y Shift: 0.5
Rectangle Scale: 1.0
Crop?: Yes


The lighting:

Something similar to this one (Amazon DE):

https://www.amazon.de/Aufger%C3%BCstet-Lichterketten-Drahtlichterkette-Batteriebetrieben-Wasserdichte/dp/B08GKKN248/ref=sr_1_4?__mk_de_DE=%C3%85M%C3%85%C5%BD%C3%95%C3%91&crid=35QHMVA5497IJ&keywords=innotree+Aufger%C3%BCstet+6er-Pack+Lichterketten+mit+Timer&qid=1684697533&sprefix=innotree+aufger%C3%BCstet+6er-pack+lichterketten+mit+timer%2Caps%2C140&sr=8-4

Tagi