Frame for a lithophane picture
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a picture frame for a lithophane picture. It can be backlit.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 61
- Makes
- 0
- Views
- 466
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial
Frame for a lithophane picture:
- Printed on an AnkerMake M5 (foundet it on Kickstarter)
- Used the SUNLU PLA+ silver 1812211A filament
- Used the AnkerSlicer with 15% infill, 100% flow/215 °C/60 °C plate temperature(initial layer: 120% flow/220 °C/65 °C plate)
- Layer height: 0,2 mm
- Speed: With the new firmware update I printed it with 250 mm/s for the initial layer/Print speed at 500 mm/s!!!
- No supports needed
- No scaling
~ 2h25 print time
- 62 g filament
The inside measurement for the Lithopane image is: 95,5 x 115,5 x 8mm
Used the webside to create the lithophan picture/model:
https://lithophanemaker.com/Framed%20Lithophane.html
The size of the picture is: 95 x 115 x 7,5 mm
Here the other parameters:
Frame Options: Frame Only
Lithophane Resolution: 0.2
Base Length: 95
Base Width: 7.5
Base Height: 7.5
Overhang Angle: 60
Maximum Thickness: 3.0
Minimum Thickness: 0.6
Height: 115
Support Thickness: 2
Support Angle: 75
X Shift: 0.5
Y Shift: 0.5
Rectangle Scale: 1.0
Crop?: Yes
The lighting:
Something similar to this one (Amazon DE):
https://www.amazon.de/Aufger%C3%BCstet-Lichterketten-Drahtlichterkette-Batteriebetrieben-Wasserdichte/dp/B08GKKN248/ref=sr_1_4?__mk_de_DE=%C3%85M%C3%85%C5%BD%C3%95%C3%91&crid=35QHMVA5497IJ&keywords=innotree+Aufger%C3%BCstet+6er-Pack+Lichterketten+mit+Timer&qid=1684697533&sprefix=innotree+aufger%C3%BCstet+6er-pack+lichterketten+mit+timer%2Caps%2C140&sr=8-4