Hexadidg Uncovered
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I removed the outer shell to save on filament and split it in half to print it at 150% and added collar and mouthpiece♥
- Ocena
- 5 / 5
- Polubienia
- 123
- Pobrania
- 652
- Wydruki
- 3
- Wyświetlenia
- 3872
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I felt like the Hexadidg was a lil small and would take up too much filament so I removed the outer shell and split it in half, made a retaining collar to connect the two and give it structure, and made a mouth piece for it.
Everything has been scaled up to 150% alternatively you could shrink it down to 66% ( its original size ) and with some clever splitting, you could make it as long as you wanted by adding midsections.
As for mouth pieces; I've added two. One has just been cut down to make a 30mm hole which I find makes it easiest to play. You may need to sand down the edge so it doesn't tare your lips up.
Everything should fit snugly and hold itself together. I did glue the collar and two pieces together to limit air leakage, which did make it sound better.
I printed everything at .20mm Layer height and 15% concentric infill. No supports in PLA
Sound Test: https://youtube.com/shorts/dwIEN00cmAQ