Partly Laser Cut Master Spool for FormFutura - ReFill 2kg
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Easier and faster to make, IF you do have acces to a Laser Cutter. Core piece is still printed.
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 39
- Wydruki
- 1
- Wyświetlenia
- 369
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Modded Version of: https://www.printables.com/model/417748-formfutura-refill-2kg-master-spool-flange
Similar size and usage. The two big side plates are now laser cut. The core is still 3D-printed, but much smaller now. It easily fits on middle sized printers like the MK3 (Original did not). If there is easy access to a laser cutter it should be also faster make. Six M4 screws and nuts are needed. The laser cut parts could be in different thickness and material, just chose a fitting screw length. I used 3mm MDF. M4x8mm (or longer) fit well with 3mm MDF.
You need to print two Hubs and cut the sides twice to get a full masterspool.