Partly Laser Cut Master Spool for FormFutura - ReFill 2kg
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Easier and faster to make, IF you do have acces to a Laser Cutter. Core piece is still printed.
- Rating
- 5 / 5
- Likes
- 7
- Downloads
- 39
- Makes
- 1
- Views
- 370
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Modded Version of: https://www.printables.com/model/417748-formfutura-refill-2kg-master-spool-flange
Similar size and usage. The two big side plates are now laser cut. The core is still 3D-printed, but much smaller now. It easily fits on middle sized printers like the MK3 (Original did not). If there is easy access to a laser cutter it should be also faster make. Six M4 screws and nuts are needed. The laser cut parts could be in different thickness and material, just chose a fitting screw length. I used 3mm MDF. M4x8mm (or longer) fit well with 3mm MDF.
You need to print two Hubs and cut the sides twice to get a full masterspool.