1 / 7
Touch ID Box with Button Press - no battery
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a box to transform your Apple Magic Keyboard into à simple Magic Touch ID.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 78
- Wydruki
- 0
- Wyświetlenia
- 1660
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
Building upon Snazzy Labs, I made this Touch ID Box managing to maintain the keystroke of the button and having it entirely removable (no plastic melting).
This is the model 2, I removed the battery.
A few notes :
- Lightning port :
- Cut the metal part in front of the holes and enlarge the plastic to 2mm with a metal drill bit.
- Use M2x5mm screws + bolts. A little finicky but doable.
- Pre-drill the fixing holes using a small screw before fixing anything. I had some 1.8mm screws lying around from laptop teardowns.
- Alternatively you can reuse the screws from the keyboard itself.
- Gently remove and stick the little square of black foam form the keyboard's chassis to the back of the button. It will help a little by acting like a spring.
That's pretty much it.
Thanks Snazzy Labs !
GLOUPY