Keurig Slim Splatter Shield
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
We had some material from an old acrylic visor lying around, so I upcycled it into a splash guard for our Keurig…
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 649
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
We had some material from an old acrylic visor lying around, so I upcycled it into a splash guard for our Keurig K-Slim coffee maker. You can use pretty much any clear acrylic film for the splash guard. The groove for the acrylic is 0.55mm, so any film that can fit in that gap will work.
Print Settings
Printer Brand:
LulzBot
Printer:
TAZ 6
Rafts:
No
Supports:
No
Notes:
Depending on your settings, you might get some wisps of filament in the shield groove, you should be able to clear them out with an index card or something of similar stiffness and width.
Category: Kitchen & Dining