Keurig Slim Splatter Shield
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
We had some material from an old acrylic visor lying around, so I upcycled it into a splash guard for our Keurig…
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 35
- Makes
- 0
- Views
- 649
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
We had some material from an old acrylic visor lying around, so I upcycled it into a splash guard for our Keurig K-Slim coffee maker. You can use pretty much any clear acrylic film for the splash guard. The groove for the acrylic is 0.55mm, so any film that can fit in that gap will work.
Print Settings
Printer Brand:
LulzBot
Printer:
TAZ 6
Rafts:
No
Supports:
No
Notes:
Depending on your settings, you might get some wisps of filament in the shield groove, you should be able to clear them out with an index card or something of similar stiffness and width.
Category: Kitchen & Dining