IKEA Tradfri Switch Decora Rocker Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a Decora switch cover that is also a Tradfri switch mount. This allows you to cover up your Decora rocker…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 261
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a Decora switch cover that is also a Tradfri switch mount. This allows you to cover up your Decora rocker switch and mount an IKEA Tradfri switch directly to it. This is done using a magnet that is glued to the back of the switch cover.
There are also holes in the cover in order to turn the switch beneath on or off with a pencil or similar object if necessary.
INSTRUCTIONS:
When attaching the magnet, be sure that you hold a Tradfri switch to the cover to make sure that the polarity of the magnets is correct. Apply a drop of glue to the recess on the back and allow the magnet to snap into place naturally. I then carefully removed the Tradfri switch and used another magnet to hold the rear magnet in place while the glue dried.
REQUIRED:
10mm x 1mm neodymium magnet
Superglue
(Optional) Longer switch plate screws
ATTRIBUTION:
I did use the cover plate designed by roznerd as my starting point: https://www.thingiverse.com/thing:2817331
OTHER MEDIA:
Here's a video of the switch plate in action: https://www.youtube.com/watch?v=v4Ub8nhvTYA
Print Settings
Printer Brand:
LulzBot
Printer:
TAZ 6
Rafts:
No
Supports:
Yes
Resolution:
0.16
Infill:
25%
Filament: eSun PLA+ White
Category: Household