Tweezer Ball Grip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I got sick of losing my tweezers and finding them right in front of me, so I made this grip that has even more benefits.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 293
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
I made this to identify my tweezers more readily, as I was always misplacing them right in front of me on my workbench. I used Atomic Neon Yellow PETG for the one in the picture, but any filament that will stand out to you will work.
This ball had the added benefit of making my tweezers much more easy to grip and control. It came as a surprise how much it improved my accuracy with them, really.
The tweezers I designed this for are quite common from what I see online. They are 1.6mm thick on the end and 9.95mm wide, and it slips onto the tweezer end 14mm. It stays on really well with no glue, but I used epoxy just to make it permanent.
Print with 100% infill, as the additional weight gives the tweezers very good balance.