1 / 2
Miele Dishwasher "Adapter" Part No 05640040
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A model of a cheap part that can be ordered from Miele (1.50 Euros), but sometimes printing is faster than ordering :)
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 283
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Public Domain
The story is that I broke this part in some friends dishwasher when I was over for the weekend. Had the model been available back then, I would have stood a chance to print it and leave their place with a fixed dishwasher. Since I had to order it by mail, I had to come back to their place later just to replace that 1.50 Euro part. If this happens to you, happy printing :)
Printing instructions:
- If you are concerned about stability, print with more infill.
- Due to the temperatures to be expected, PLA etc. are not good choices, PET/PETG was fine.
- I used “paint-on supports” in PrusaSlicer so that only the outer cantilever is supported but nothing else or else, I fear, it would create support in the middle, in the shaft “intake”.