1 / 2
Miele Dishwasher "Adapter" Part No 05640040
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A model of a cheap part that can be ordered from Miele (1.50 Euros), but sometimes printing is faster than ordering :)
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 29
- Makes
- 0
- Views
- 283
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Public Domain
The story is that I broke this part in some friends dishwasher when I was over for the weekend. Had the model been available back then, I would have stood a chance to print it and leave their place with a fixed dishwasher. Since I had to order it by mail, I had to come back to their place later just to replace that 1.50 Euro part. If this happens to you, happy printing :)
Printing instructions:
- If you are concerned about stability, print with more infill.
- Due to the temperatures to be expected, PLA etc. are not good choices, PET/PETG was fine.
- I used “paint-on supports” in PrusaSlicer so that only the outer cantilever is supported but nothing else or else, I fear, it would create support in the middle, in the shaft “intake”.