1 / 2
Adapter plate to use a OREGON ONE FOR ALL BLADE on a STIHL RMA 339 — zdjęcie 1
1 / 2

Adapter plate to use a OREGON ONE FOR ALL BLADE on a STIHL RMA 339

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

An adapter to use the OREGON ONE FOR ALL BLADE on the STIHL RMA 339 lawnmower

Ocena
0 / 5
Polubienia
2
Pobrania
19
Wydruki
0
Wyświetlenia
565
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

ACHTUNG !!!



Diese Modifikation ist VON STIHL UND OREGON NICHT VORGESEHEN! Der Umbau auf ein Messer eines anderen Herstellers geschieht auf eigene Gefahr! Ich übernehme keine Verantwortung oder Haftung für Sachschäden oder Personenschäden!

 

ATTENTION !!!

 

This modification is NOT INTENDED BY STIHL AND OREGON! The conversion to a aftermarket blade is at your own risk! I no responsible or liability for property damage or personal injury!

 

DE Beschreibung:

 

Das originale Messer von Stihl ist mit 40 € bis 60 € je nach Anbieter recht teuer, weshalb ich mich nach alternativen umgesehen habe. Die Messer von Oregon sind mit 17 € deutlich günstiger und sind trotzdem von hoher Qualität. Um das Messer am Rasenmäher zu befestigen, benötigt man diesen Abstandhalter, da es sonst am Mäher schleift. TPU A95 und 100 % konzentrische Füllung sollte verwendet werden, um maximale Stabilität und Balance zu Gewehrleisten.

 

EN Description: 

 

The original blade from Stihl is with €40 to €60 quite expensive, depending on the supplier. So I looked for some alternatives. Oregon blades are quite cheap at €17 and are still of high quality. You need this spacer to attach the blade to the lawn mower, otherwise it will rub against the mower. TPU A95 and 100% concentric infill should be used for maximum stability and balance.

 

Druckeinstellungen/print settings:

 

Düse/Nozzel: 0.4mm/0.6mm

Schichthöhe/layer height:  0,25mm, 0,2mm or 0,1mm

obere und unterer Schichten/top and bottom layers: 3 layers konzentrisch/concentric

Füllung/infill: 100% konzentrisch/concentric

Stützstruktur/supports: keine/none

Material:  TPU A95

Tagi