1 / 1
35mm Film Holder - Thin/Skinny Strap — zdjęcie 1

35mm Film Holder - Thin/Skinny Strap

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This attachment enables you to equip your 35mm (135) film onto your camera neck strap.

Ocena
0 / 5
Polubienia
1
Pobrania
17
Wydruki
0
Wyświetlenia
243
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution — Noncommercial

This model was remixed from the original designer iElectronCloud to work with a more common and thinner (1 cm) width camera strap as the original design was made for a PeakDesign Leash Strap.

This attachment enables you to equip your 35mm film onto your strap. This was designed with a short trip in mind, where you won't need more than a roll. The film container is held by friction.

!!!!!ATTENTION!!!!!

This model was designed to be printed with ABS plastic, you may need to scale down (-0.5%?) if you are printing with other materials.

 

NOTE! 
Kodak film canisters are a little wider than other brands this may result in the canister being too snug or the canister flexing out of perfect round. Generally I keep one plastic canister in the holder at all times and just swap the film that’s in it.

Tagi