35mm Film Holder - Thin/Skinny Strap
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This attachment enables you to equip your 35mm (135) film onto your camera neck strap.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 17
- Makes
- 0
- Views
- 243
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial
This model was remixed from the original designer iElectronCloud to work with a more common and thinner (1 cm) width camera strap as the original design was made for a PeakDesign Leash Strap.
This attachment enables you to equip your 35mm film onto your strap. This was designed with a short trip in mind, where you won't need more than a roll. The film container is held by friction.
!!!!!ATTENTION!!!!!
This model was designed to be printed with ABS plastic, you may need to scale down (-0.5%?) if you are printing with other materials.
NOTE!
Kodak film canisters are a little wider than other brands this may result in the canister being too snug or the canister flexing out of perfect round. Generally I keep one plastic canister in the holder at all times and just swap the film that’s in it.