Compact Bearing Spinner (Fidget)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Compact bearing spinner can be used as a toy or a fidget (good for nervous hands).
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 137
- Wydruki
- 2
- Wyświetlenia
- 549
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Share Alike
1. Bearings
You need four 608 (single-row radial ball) bearings. Cheap ones seems to be sufficient. Quality bearings spin better (SKF® shoud be the best). Brand is more important than ABEC class. Hybrid ceramic bearings bring incredible spinning time.
- 608 (without dust shield - visible balls) OK
- 608 ZZ / 2Z (dust shield on both sides) OK
- 608 2RS (sealed) worse but usable
Where to find bearings?
- Skateboard shop
- Sport shop with Inline skates
- Specialized shop with bearings
- Somewhere on the internet
How to prepare bearings?
I recommend to wash slow bearings before use with fine-grained lubricant like WD40 or Ballistol to ged rid of factory vaseline and get lower friction i.e. longer spin time.
2. Print
Print 1x spinner body and 2x bearing caps for center bearing or 8x caps to cover all of them.
Recommended Print Settings:
Infill: 20%
Resolution: 0.2 - 0.1
Perimeters: 3
Solid layers: 3
3. After Print
- Press one bearing into center hole first through top side of the print
- After that press rest of them (use sand paper if necessary or soften holes by heat before press)
- Add caps
- Share your print
- Enjoy