Can Cap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A reusable lid for that half tin of baked beans you have in the fridge.
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 132
- Wydruki
- 2
- Wyświetlenia
- 638
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Share Alike
A no-nonsense reusable lid for that half tin of baked beans you have in the fridge. Got fed up of mucking about with cling film.
This has to be printed in TPU, but works a treat on the standard tins in the UK. Should fit cans with a top-lip diameter of about 74mm.
Printed with a concentric top/bottom infill to try and further reduce any gaps, plus I think it looks a bit cooler.
One particular issue I had printing this was that the TPU filament twisted itself up when printing the circular walls and jammed up the extruder (concentric or regular infills) several times. See the last picture of the removed filament FYI. It printed fine when I fed the filament through a reverse bowden tube though, maybe something to keep an eye on when printing. Printed on a MK3S+