Universal Top Mount Soundbar Mounting Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Quasi Universal Top Mount Soundbar Mount Bracket. Modified bracket to have slideable M4/M5 screw mounthole.
- Ocena
- 4,25 / 5
- Polubienia
- 45
- Pobrania
- 609
- Wydruki
- 4
- Wyświetlenia
- 3315
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Share Alike
Quasi-Universal Top Mount Soundbar Mount Bracket.
Modified bracket to have slide-able M4/M5 screw mounting hole.
Most soundbars only have mount holes on the bottom for some reason. This does both top and back.
Fits up to ~100mm depth soundbars. You can position yours to have your optimal balance with a long moveable screw hole.
Printed peachy in like this in Silk PLA with tree supports for the holes.
This particular one was for a ~40mm depth Vizio PQ TV down a few cm from the top. It should fit “bezel-less” screens too. Feel free to stretch or shrink the geometry to suit your needs. I might be able to do a make a few modifications if requested.
It's geometry is not very clean. Prints fine but it probably could use a remesh.
.3mf File is from Orca Slicer with my settings.